Micron Filters

The range of filter housings offered by us includes Standard Filter Housings in SS 316, Poly Carborate and PP as well as custom designed housings to cater to the specific requirement of the customers. Standard housings are offered in SS304, SS316 and MS (either in Epoxy painted or PP/rubber lined). In order to meet specification of Pharma industry and to meet latest GMP requirement all our housings meant for Sanitary, applications are provided with mirror finish on both, sides and are also electropolished to 240 grit finish wherever such a finish is called for.

These filter housings are designed to accomodate types of filter elements having various end filter configurations viz DOE, SOE with code 7/2, or threaded connections.

The filter housing supplied by us are used by the whole spectrum of process industry to cover Pharma ceutical, Synthetic Fibre, Petrochemicals etc.We are pleased to give below the salient features of the filters offered by us to suit your specific application.

We hope you will find the information adequate. Details of filter elements offered along with the filter housing offered are furnished in our site.

APPLICATIONS

- Reverse Osmosis Water system prefiltration
- Beverage pre and final filtration
- Brewery Guard filtration
- Microelectronics and Semiconductor industry prefilter
- Pharmaceutical product filtration
- Chemical clarification
- Magnetic Tape and Media clarification
- Cosmetics clarification

Canadian clear BRAN MN DATA

Production Information:

Canadian clear bran MN cartridges are a range of sub micron absolute rated filters for use in critical applications in the pharmaceutical, biotechnological and other crucial production processes.

Canadian clear suit particulate and bacterial removal requirements. They are offered in a full range of lengths and end cap configurations to suit the majority of customer's existing filter housings.

sbran MN is constructed from naturally hydrophilic nylon membrane supported by Polypropylene inner and outer support layers and encapsulated inside an all polypropylene cage.

Pleat Process

Canadian clear Pleat Process:

Canadian clear pleat elements are cylindrical filters consisting of a pleated filter media, sometimes arranged in multiple-layers as in the GF series, supported by a perforated core and usually an outer protective sleeve. The pleat packs are sealed into the required end cap. The cartridges are manufactured to provide a large surface area in a small volume resulting in high throughputs coupled with lower pressure drops and longer life compared to depth type filter cartridges. Canadian clear pleat elements are manufactured in our modernly built factory at Sheffield, using the latest technology Modern production and testing methods ensure reproducibility of product, first class performance and competitive pricing.

The materials of construction should be chosen to suit the particular process conditions. Cartridges are available with gass fibre/polyester and cellulose filter media, standard elements have polyproplene cores and end caps, but for more arduous conditions stainless steel end caps and cores can be supplied. All materials used in the manufacture of Canadian clear pleat elements, are checked on arrival at our factory to ensure conformity with our exacting standards of quality and performance.

Canadian clear pleat elements can be used in the filtration of a wide variety of gases liquids, where precise and economical cartridge filters are required. Micron ratings available are 5 100 microns in cellulose 1 - 35 microns for glass fibre Lengths up to 40"(1 mete) can be manufactured in one piece with diameter from 2" to over 12"

Standard elements are designed for a maximum working temperatures of 80"C and a maximum differential pressure of 4 bars. However, we recommend that the differential pressure due to blinding be restricted to 2 bars for the most economical operation. For higher temperatures and pressures, a stainless construction can be used. GF elements are constructed of essentially inert material and are suitable for a wide variety of chemicals in particular acidic and alkaline solutions of chemicals, in the range of pH 1-14. Some caution should be observed with organic solvents and strongly oxidizing substances. In case of any doubts, please contact us. Cartridges are readily available for on site trails. Alternatively liquid samples can be evaluated in Sheffield

The performance of Canadian clear pleat elements is given on the basis of laboratory tests and on site evaluation. The nominal and absolute figures given are obtained under standard test conditions. We recommend that on site trails are carried out to ensure cartridge performance and life meets the clients full requirements. If in doubt, please contact us.

All industry standard end cap configurations can be supplied. The more common codes being code 3 (222 '0' ring). Code 7 (226) and double open ended (DOE). If in doubt about end caps and '0' rings/gaskets, please contact us or supply an old element for matching.

Standards lengths available are 10", 20", 30" and 40' nominal with diameters of 68 O.D. and 28 mm I.D. thus enabling easy fitting into most types of housing.